Welcome to SAB Heli Division

Register Your Goblin Helicopter

Please take a moment to register your Goblin helicopter as it will allow us to keep you informed about changes to your kit, such as upgrades, updates, retrofits and other important developments.
Please note that SAB Heli Division will not be held responsible for issues arising with your model and will not provide support unless you register.

Please click here to register your Goblin. »

Member Login

Lost your password?

Not a member yet? Sign Up!

SAB GOBLIN 630 YELLOW/RED (With main and tail blades)
SAB GOBLIN 630 YELLOW/RED (With main and tail blades) [SG630]
Out Of Stock



General Specifications
Electronic Specifications
  • Main rotor diameter: 1428mm (with 630mm blades)
  • Main blade length: 600 to 630mm
  • Tail rotor diameter: 278mm
  • Tail blade length: 105mm
  • Main shaft diameter 12mm
  • Tail shaft diameter: 6mm
  • Spindle diameter: 10mm
  • Pinion 20T
  • Motor pulley 20T
  • Main gear 68T
  • Tail pulley 27T
  • main pulley 37T
  • Weight including electronics 3220g (excluding batteries).
  • Maximum motor size: 64mm diameter, maximum height 64mm
  • Battery compartment: 60x58x350mm (adaptable to 64x58x350mm)

The following motor pulleys are available:
  • 18T Pinion = ratio 11.3:1
  • 19T Pinion = ratio 10.7:1
  • 20T Pinion = ratio 10.2:1
  • 21T Pinion = ratio 9.7:1 (stock ratio)
  • 22T Pinion = ratio 9.3:1
  • 23T Pinion = ratio 8.9:1
  • 24T Pinion = ratio 8.5:1
  • 26T Pinion = ratio 7.8:1
  • With Scorpion motor HKIII 4035-560,
  • normal= 20T
  • Hard 3D= 21T



Disclaimer: SAB Heli Division does not endorse any of the electronic components listed. These are only suggestions based on our own testing. Please make sure to do your own research to ensure compatibility between these components, specially between motors and ESCs.

Available Soon!!!